ShapeBoss & Stencil Sets
Create the ShapeBoss sandwich. Template, paper, wax paper, template. I can’t stress enough what a difference the wax paper layer makes. It allows your stylus to glide easily on the second embossing and reduces the chances of tearing your paper. Emboss the design once and carefully remove the wax paper. You are not going for detail this time around just laying a slippery track for the second embossing. Emboss the design again; this should be quick and easy now that you have a waxy surface. This second embossing allows for a deeper more detailed impression. Each design element can be used individually or in combination with other elements to create beautiful effects on your art projects. If the burnishing tip does not glide easily on your cardstock, rub area with wax paper or your hand before embossing. This will smooth the paper and simplify your task. Begin by practicing on scrap paper. For best results, use 65lb. or heavier cardstock. Also works great with vellums, suede paper, metallic paper, thin metals and foils. The tray fits a full 8 ½ x 11 sheet, but you can emboss any size by shifting the paper and repositioning the pegs as you go along. When embossing, letters and patterns should appear backwards while working. When flipped, the embossed design will read correctly. To maximize the raised effect and sharpen edges, first emboss with a large ball burnishing tip of stylus. Next, use a smaller ball burnishing tip and retrace one or more times until desired look is achieved. For multi-dimensional effect or layered embossing, try embossing smaller designs inside of larger ones. For specific effects, enhance embossed areas with chalks, markers, paints, glitter, etc… To Deboss (opposite of emboss or to press design in), position stencils on the tray with right sides down. Be sure to keep stencil labeled “Bottom” on bottom and stencil labeled “Top” on top. Position paper between stencils. Using stylus, trace the designs. Since you are working on the finished side of your project, the design will be pressed in or debossed. Combine embossing and debossing techniques for a unique look! Experiment with other Fiskars ShapeBoss tools for the stylus that best suits your project needs. Clean stencil with lanolin-free baby wipes. Use cotton swabs for cleaning the cut edges. By
« Back to Tips and Techniques |
